|
|
|
|
Buy and Sell the from our Classifieds.
|
Shop for Similar Products
|
|
|
|
|
|
|
|
| |
Submitted by
erwin hameelinna
a Weekend Warrior
from finland
Date Reviewed: March 13, 2002 | | Favorite Trail: | 9 feet.com in aber some fing or other Wales | | Duration Product Used: | 1 Year | | Price Paid: |
$50.00 | | Purchased At: | a bike shop i fing its closed now | | Strengths: | well its a nice pimpy gold colour and thats it! | | Weaknesses: | it pooo it doesn't keep your chain its that simple! well its more pooy than that ! cos when the chain does get dropped (and it will drop all the time) it either gets sucked in yourback wheel and ar*e it all up or breaks the chain!!! | | Similar Products Used: | DMR and front mech | | Bike Setup: | free ride hard tail? | | Bottom Line: | its crap ! although heres some advices if you were dump and brought one ! set-up tips
1) remove cranks
2) remove bottom backet (with correct tool)
3) remove the AC gay device
4) place the device in your nearest bin
5) buy a dmr like i have and cut your hand fitting that fing! | Value Rating: Overall Rating: |
Submitted by
Urwin Hamelinna
a Downhiller
from finland?
Date Reviewed: October 19, 2001 | | Favorite Trail: | kilvey hill | | Duration Product Used: | 6 months | | Price Paid: |
$42.00 | | Purchased At: | A bike shop in worcster | | Strengths: | its erm ok for street riding | | Weaknesses: | It doesn't keep the chain On . Its cool for small bumps but if you go though a rock field at speed its straight off if your lucky the chain won't rap it self around your rear wheel and bend (snap off) your rear mech hanger ! I was lucky ! | | Similar Products Used: | I used a super small chain and a top for about week and that was better value for money !
DMR chain thingy good but it takes a bit to set it up !
MRP copy just as cr*ppy as the AC but at least it not trying to be anything good | | Bike Setup: | Planet X Jack flash(15") judys (100mm) x-lite stem a gay AC chain device wheels oh and formula rear disc ! | | Bottom Line: | Well it doesn't do won't its meant to do and when it buggers up it trys to take the rear mech wheel and general trash your pride and joy !
So thats don't buy this product even if in the bargin bin its in there its Cr*p!
thats -1 silly chili ! this is poo the chain comes off all the time and I'm some jackas* with all the gear and no idea I'm doing an engineering course at uni (3rd yr) | Value Rating:Overall Rating: |
Submitted by
david parkins
a Downhiller
from lewiston, ID
Date Reviewed: September 19, 2000 | | Favorite Trail: | sand mountain (north Idaho) | | Duration Product Used: | 6 months | | Price Paid: |
$65.00 | | Purchased At: | TNT Bicycles Lewiston, ID | | Strengths: | Affordable | | Weaknesses: | Bends a lot, makes lots of noise, when chain does come off, it doesn't go back on without tools. | | Similar Products Used: | none yet | | Bike Setup: | Kona Roast, Profile cranks, Rohloff chain, 38t chainring | | Bottom Line: | I purchased this chain tensioner because it was fairly inexpensive, and it was an AC product. Since then I have had the chain jam itself unrepairable-like twice while raceing. Talk about a stream of cusswords! I have also had problems with chain/pulley angles when in larger gears on the rear cassette.
Removing the lower pulley and adding an old-style chainstay mounted tensioner seemed the only solution to the above problems. I think I will only be happy when I sell it and buy a more expensive one. | Value Rating: Overall Rating: |
Submitted by
ian
a Downhiller
from scotland
Date Reviewed: September 18, 2000 | | Favorite Trail: | the new 6 minute ft william | | Duration Product Used: | 3 months | | Price Paid: |
$60.00 | | Purchased At: | bikesport, innerliethen | | Strengths: | Price, looks | | Weaknesses: | phhbbtt! where do i start, weak, noisy, impossible (seemingly) to secure, dented my peachy new patriot frame! | | Similar Products Used: | dmr chain cage | | Bike Setup: | see other review | | Bottom Line: | I've already reviewed this, and what i said there still goes, sort of. I replaced the top roller with a hacked up dmr chain cage, and wrapped foam and inner tube around the bottom roller, thus quietening things down a bit.
Problem is, the anchor bolts are too short to be effective, so the darn thing kept (past tense, it's in the bin now) rotating into the frame, even locking my suspension out and denting the frame. Having removed everything from it, i now realise how easily it has twisted and bent, then holders for the rollers are all over the shop.
Having looked about, i now reckon you'd be better off buying one of those mrp style rip off things, me: i'm saving for the real thing. | | Value Rating:Overall Rating: |
Submitted by
ian
a Downhiller
from benderloch, scotland
Date Reviewed: September 4, 2000 | | Favorite Trail: | ft william | | Duration Product Used: | Less than 1 month | | Price Paid: |
$60.00 | | Purchased At: | Bikesport, innerliethen | | Strengths: | Cheap, simple, looks OK | | Weaknesses: | Noisy, weak, seemingly impossible to set up right, hits frame | | Similar Products Used: | dmr chain cage, dcd | | Bike Setup: | 6" patriot, 5" bombers, discs f & r, single 42 tooth ring with 8 speed XT at back | | Bottom Line: | Hoo boy, i know it's a budget device compared to MRP etc. but this is one thing i will quickly be getting rid of. It seems to have twisted already, the anchor bolts are weak, can't be tightened enough and don't seem to do the job hence my top roller constantly ends up jamming under the swingarm of my patriot. The bottom roller doesn't seem to move, and worst of all, the chain seems to ride up the side of the roller and jams, so not only am i left without pedalling, but in the worst instance i couldn't actually rotate the cranks until i stamped down incredibly hard, thus gouging the (admittedly) lovely gold finishing. It's a shame, because the device is cheap and attractively simple, but unfortunately NOT fit-and-forget. | Value Rating:Overall Rating: |
Submitted by
iain
a Downhiller
from manchester
Date Reviewed: August 3, 2000 | | Favorite Trail: | sligachan | | Duration Product Used: | 3 months | | Strengths: | average everything | | Weaknesses: | I can't set it up right and the frame anchors won't fit | | Similar Products Used: | dmr speed guide | | Bike Setup: | azonic rc37s hopes etc | | Bottom Line: | I don't know about these...maybe I just can't set them up right but the chain keeps coming off under hard pedalling all the time (resulting in many unfortunate injuries to my person but anyway) they are also very noisy, and seem to affect the gears shifting a bit.
If anyone can help me set this thing up better then email me please before I chuck it away and get the roox chain animal! | Value Rating: Overall Rating: |
Submitted by
Mark Littler
a Downhiller
from Crewe, Cheshir, England
Date Reviewed: March 14, 2000 | | Favorite Trail: | Snowdon | | Duration Product Used: | 3 months | | Strengths: | Strong, cheap effective | | Weaknesses: | Noisy unless inertube placed over bottom roller | | Similar Products Used: | MRP (crap and too hard to set up) | | Bike Setup: | DH | | Bottom Line: | It works, its cheap, it looks good and performs well once set up. Its the best one out there so go buy one!!!!! | | Value Rating:Overall Rating: |
Submitted by
Harri
a Downhiller
from Qsamo
Date Reviewed: August 16, 1999 | | Favorite Trail: |
Ruka | | Duration Product Used: |
3 months | | Strengths: |
simple,thick | | Weaknesses: |
its easy to bend theboltsor at least the upper one,which keep the tensioner in right angle,the lower roller doesent seem to spin at all!? | | Similar Products Used: |
none. | | Bike Setup: |
Jamis Dakar Pro with dh goodies | | Bottom Line: | good thingie | | Overall Rating: |
Submitted by
Scott Meredith
a Downhiller
from Spokane, WA
Date Reviewed: August 1, 1999 | | Favorite Trail: |
Ride the Runt | | Duration Product Used: |
3 months | | Strengths: |
Works Great, simple, easy to mount, and contrary to that other review, CAN work on a full suspension. Works on Everything. | | Weaknesses: |
Nothing i can think of | | Similar Products Used: |
Black Spire, Mr. Dirt, Custom, AC Pro Chainguide | | Bike Setup: |
Jamis Dakar Comp, custom built for DH | | Bottom Line: | Great for the aspiring DHer, and cheap too. Only 60 bucks. | | Overall Rating: |
Submitted by
Ben Pinnick
a Downhiller
from Leeds, UK
Date Reviewed: June 18, 1999 | | Favorite Trail: |
Cheddar DH | | Duration Product Used: |
less than 1 month | | Strengths: |
Its cheaper than most, no complex parts to go wrong. Its very effective!! Ive not lost my chain once since fitting it. It also looks (although this is as yet untested) indestructable. | | Weaknesses: |
It can be a little noisy at the extremes of chain line, but aren't they all? It is only suitable for hardtails | | Similar Products Used: |
DCD (crap)
MRP Copy (flexy)
Marin/Gleed (good but Noisy) | | Bike Setup: |
Hardtails only im afraid, Mines on an Azonic DS-1 with a 44T front ring runing, It should fit a 40 - 52 tooth ring though | | Bottom Line: | Excellent budget chain device that looks way cool, and works 'n' all. Not too haevy either, the perfect slalom choice | | Overall Rating: |
| |
|
Photo Caption Contest
(sponsored by Maxxis)
|
Enter here
|
|
|
$ 60.00
