|
Crank Bros.
Egg Beater 4Ti
|
|
|
|
|
|
|
Buy and Sell the Egg Beater 4Ti from our Classifieds.
|
Shop for Similar Products
|
|
|
|
|
|
| |
Submitted by
BrentP
a Cross Country Rider
from Calgary, AB
Date Reviewed: September 1, 2008 | | Favorite Trail: | Anything in K-Country | | Duration Product Used: | 3 months | | Price Paid: |
$300.00 | | Strengths: | Extremely light. Nothing else comes close.
Coolness factor.
4 positions for entry. | | Weaknesses: | Lack of durability. I probably have less than 400 km on them, and already I have broken one of the titanium clip-in wings right off (from a rock impact, I assume). I've sent an email to Crank Brothers about repair, so I'll wait to see how good/bad their service is.
I find entry to be very finicky, and thus they are not good at all if you ride steep technical terrain. I find it impossible to click into them on the first attempt, unlike my Shimano's, and it takes several pedal strokes and much hunting/pushing/stabbing to get the cleat to engage. When trying to get into them on steep technical terrain, you're pretty much screwed because after a couple of pedal revolutions without being able to lock in, and with a non-existent platform, you're pretty much toast and stopped with your foot down after about 3-4 seconds. On smooth cross country terrain, or on the road (these would make an excellent road pedal) you're fine, but on steep technical (rocky, rooty) terrain, these are the most frustrating things imaginable. I plan on either going back to my two-sided Shimanos (which I can click into first try, every time) or might try the Candy's so that at least I have a platform and can pedal if I miss the engagement on my first few attempts.
The other thing I don't like is that there is far too much float, which makes them feel very insecure and has causes wear on the inside heel area of my right shoe from contact with the crank. | | Bike Setup: | Santa Cruz Blur XC with a full race setup - 23.5 lbs, including pedals. | | Bottom Line: | Great for weight weenies who ride smooth, XC trails. Horrible if you ride trails with a lot of technical climbing where you are likely to loose momentum periodically and 'dab' your foot, because you will find it very hard to get back into the pedals. I find I often need to push the bike to a flat spot (or tree I can lean against) so I can clip back in, where I've never had a problem with my regular Shimano pedals. I bought these to help get the weight down on my race bike, but they're more hassle than they're worth, and don't function as well as I was expecting. | Value Rating: Overall Rating: |
Submitted by
BrentP
a Cross Country Rider
from Calgary, AB
Date Reviewed: September 1, 2008 | | Favorite Trail: | Anything in K-Country | | Duration Product Used: | 3 months | | Price Paid: |
$300.00 | | Strengths: | Extremely light. Nothing else comes close.
Coolness factor.
4 positions for entry. | | Weaknesses: | Lack of durability. I probably have less than 400 km on them, and already I have broken one of the titanium clip-in wings right off (from a rock impact, I assume). I've sent an email to Crank Brothers about repair, so I'll wait to see how good/bad their service is.
I find entry to be very finicky, and thus they are not good at all if you ride steep technical terrain. I find it impossible to click into them on the first attempt, unlike my Shimano's, and it takes several pedal strokes and much hunting/pushing/stabbing to get the cleat to engage. When trying to get into them on steep technical terrain, you're pretty much screwed because after a couple of pedal revolutions without being able to lock in, and with a non-existent platform, you're pretty much toast and stopped with your foot down after about 3-4 seconds. On smooth cross country terrain, or on the road (these would make an excellent road pedal) you're fine, but on steep technical (rocky, rooty) terrain, these are the most frustrating things imaginable. I plan on either going back to my two-sided Shimanos (which I can click into first try, every time) or might try the Candy's so that at least I have a platform and can pedal if I miss the engagement on my first few attempts.
The other thing I don't like is that there is far too much float, which makes them feel very insecure and has causes wear on the inside heel area of my right shoe from contact with the crank. | | Bike Setup: | Santa Cruz Blur XC with a full race setup - 23.5 lbs, including pedals. | | Bottom Line: | Great for weight weenies who ride smooth, XC trails. Horrible if you ride trails with a lot of technical climbing where you are likely to loose momentum periodically and 'dab' your foot, because you will find it very hard to get back into the pedals. I find I often need to push the bike to a flat spot (or tree I can lean against) so I can clip back in, where I've never had a problem with my regular Shimano pedals. I bought these to help get the weight down on my race bike, but they're more hassle than they're worth, and don't function as well as I was expecting. | | Value Rating:Overall Rating: |
Submitted by
Mark
a
from Seal Beach
Date Reviewed: January 22, 2008 | | Duration Product Used: | Less than 1 month | | Strengths: | I'm a cyclocross rider and I find these pedals the easiest to get in and out of. They seem to clip in without me even thinking about it.
Nice that they come in a shorter spindle length too since I'm sensitive to the Q factor. | | Weaknesses: | Price. Getting them as a gift offsets this weakness though ;) | | Similar Products Used: | Candys, other flavors of Egg Beaters form Crank Bros | | Bike Setup: | Several. SS 'Cross and SS MTB | | Bottom Line: | Pricey, but what a difference the coating makes when entering/exiting these pedals!
Ask Santa for a set for sure. | Value Rating: Overall Rating: |
Submitted by
Al
a Cross Country Rider
from MN
Date Reviewed: July 29, 2007 | | Duration Product Used: | 3 months | | Price Paid: |
$282.00 | | Purchased At: | ebay | | Strengths: | Light weight, easy of entry/release, great in mud | | Weaknesses: | Cost, noisy, bearings, grease fitting | | Similar Products Used: | SPD,Time ATAC,Expedo | | Bottom Line: | I got these pedals as a weight saver over my Time Atac Carbons which I've had for 6yrs. Had some Expedo Ti pedals, broke 2pr in 2 years and decided to move on to the CB 4Ti which are less than half the weight of the Times.
Pedals are suprisingly easy to get in and out of, despite not having a tension adjustment like SPD's. My Times with no tension adjustment required me to shave the cleats to get the release low enough, not so with the CB's. These have the perfect balance of smooth entry/release and float while in the pedal. I don't ride much in the mud, but when I have release hasn't been affected like my old SPD's. I had some reservations, having read some negative comments about riders with Eggbeaters being ejected from the pedal when the bottom side hits a rock or root and opens the top side. Happily, I havn't had this issue in the few months I've owned them.
The down side of these pedals is that they generated really annoying clicking noises with every pedal stroke. I liberally applied some Pedro's Syn Grease to the outside of the pedal body and it went away, hoopefully it stays this way. Also, the pedals will make a buzzing sound if you're pedaling at about 20mph with some cornering. I repacked the bearings with Pedros Syn, but it has not gone away. The pedals use a plastic bushing on the inboard side and bearing on the outboard side, pretty cheesy compared to Time that uses two inboard and one outboard bearing. One more thing about the bearings, CB gives you a grease fitting which allows you to remove the end cap of the pedal, thread in fitting and pump fresh grease from the outboard side to the inboard side and out the seal. This is an excellent idea to save time on maintenance, unfortunately the pressure required from a bike grease gun to force the new grease through partially dislodges the inboard grease seal leaving the spindle and bushing vulnerable as well as decreasing freedom of pedal movement.
Considering the high price, I would have expected more, at least a better bearing system than their low end models. I only have a few hundred miles on them so far, so long term durability is unknown - I have my doubts, but at least rebuild kits are cheap at $15! | | Value Rating:Overall Rating: |
Submitted by
Ryan McNeel
a Weekend Warrior
from Eagle River, Alaska
Date Reviewed: July 23, 2007 | | Favorite Trail: | ryan_mcneel@yahoo.com | | Duration Product Used: | 1 Year | | Price Paid: |
$325.00 | | Purchased At: | price point | | Strengths: | low weight. looks great. Just a great peda; | | Weaknesses: | shorter than original version, but works great still. PRICE. | | Similar Products Used: | cages, and crankbros. candy | | Bike Setup: | Novara Team FS | | Bottom Line: | These are some of the best pedals. The previous poster said they release easily. If you ajust your cleats this will not be a problem. My guess is that if he takes it to his lbs they will fix it for him.
These pedals are great. No look lock-in is the way to go with biking. | Value Rating: Overall Rating: |
Submitted by
dave
a Racer
from vancouver
Date Reviewed: July 20, 2007 | | Duration Product Used: | 2 Years | | Purchased At: | ebay | | Strengths: | super light. look cool. | | Weaknesses: | release too easily in technical terrain. | | Similar Products Used: | spd | | Bike Setup: |
blur | | Bottom Line: | Nice pedals but not secure enough for BC terrain. Planning to switch to the new spds. For extreme weight weenies only. | | Value Rating:Overall Rating: |
Submitted by
chris
a Racer
from Colorado Springs
Date Reviewed: July 28, 2006 | | Favorite Trail: | Buffalo Creek | | Duration Product Used: | 6 months | | Price Paid: |
$400.00 | | Purchased At: | LBS | | Strengths: | Light and Functional | | Weaknesses: | Price | | Similar Products Used: | Shimano | | Bike Setup: | 22 lb. Kona King | | Bottom Line: | Super light best working pedal on the market.I like light stuff but dont want to sacrifice strenght and durability and these fit the bill!!!! | | Value Rating:Overall Rating: |
| |
|
Photo Caption Contest
(sponsored by Maxxis)
|
Enter here
|
|
|
$
